Led Worklight - Craftsman 320.10871 Operator's Manual

-I
KNOW YOUR CIRCULAR SAW (Fig, 3)
NOTE: Before attempting to use your saw, familiarize yourself with all of the
operating features and safety requirements.
Your circular saw has a precision-built eiectdc motor and it should only be connected to
a 120-volt, 60-Hz AC ONLY power supply (normal household current). DO NOT operate
on direct current (DC). This large voltage drop will cause a loss of power and the motor
will overheat, If the saw does not operate when plugged into correct 120-volt, 60-Hz AC
ONLY outlet, check the power supply The saw has an 8-fL, 2-wire power cord
(no adapter needed).
This Circular Saw has the following features:
1.13 Amp, 5000 RPM (no-load speed) motor provides the power and torque for fast,
sure cuts in wood, plywood, hardboard and wood-base materials.
2. LaserTrac T_ The unique, innovative feature for accurate, efficient cutting!
3. LED WORKLIGHT illuminates cutting area for easy visibility.
This light stays "On" when saw is plugged into power source.
4. Quick depth-of-cut adjustments with a maximum depth of cut:
2 3le-in. thick at 90; 1 13hs-in. thick at 45 °
5. Easy to read bevel cut scale adjusts from 0 ° to 52 ° bevel capacity.
6. Die-cast aluminum blade guards for extra strength and durability,
7. Extended length, trigger switch for maximum control and comfort.
Squeeze for power "ON", release for power "OFF"°
8. Large stamped Steel Base provides a stable work surface for better saw control.
9. Soft-grip ergonomically designed contoured rear handle and front assist handle
for positive gripping, control, balance and comfort.
10. Includes Craftsman ® 24 tooth carbide-tipped steel general purpose blade.
11. Top mounted blade spindle lock for easy blade changes.
12. Includes edge guide to help produce accurate cuts.
13_ Sawdust ejection chute helps direct dust and chips away from operator.
14_ Permanently lubricated '100% ball bearings for smooth operation and tong life,
15. Durable machined gearing for efficient power transmission.
]
15