Entering The Wwn Checksum; Location Of The World Wide Name Labels - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

Enterprise virtual array
Hide thumbs Also See for StorageWorks 6400/8400 - Enterprise Virtual Array:
Table of Contents

Advertisement

Figure 24 Location of the World Wide Name labels
.
1. World Wide Name labels
Complete the following procedure to assign the WWN to each pair of controllers.
1.
Turn the power switches on both controllers off.
2.
Apply power to the rack.
3.
Turn the power switch on both controllers on.
NOTE:
Notifications of the startup test steps that have been executed are displayed while the
controller is booting. It may take up to two minutes for the steps to display. The default
WWN entry display has a 0 in each of the 16 positions.
4.
Press
or
and select the next.
5.
Repeat
Step 4
6.
Press Enter to accept the WWN and select the checksum entry mode.

Entering the WWN checksum

The second part of the WWN entry procedure is to enter the two-character checksum, as follows.
1.
Verify that the initial WWN checksum displays 0 in both positions.
2.
Press
or
and select the second character.
3.
Press
or
exit.
4.
Verify that the default display is automatically selected. This indicates that the checksum is valid.
until the first character of the WWN is displayed. Press
to enter the remaining characters.
until the first checksum character is displayed. Press
until the second character is displayed. Press Enter to accept the checksum and
HP StorageWorks 6400/8400 Enterprise Virtual Array user guide
to accept this character
to accept this character
43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks 6400Storageworks 8400

Table of Contents