NOTE:
If you enter an incorrect WWN or checksum, the system will reject the data and you must repeat the
procedure.
Entering the storage system password
The storage system password feature enables you to restrict management access to the storage system.
The password must meet the following requirements:
•
8 to 16 characters in length
•
Can include upper or lower case letters
•
Can include numbers 0 - 9
•
Can include the following characters: ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ ] ^ _ ` { | }
•
Cannot include the following characters: space ~ \
Complete the following procedure to enter the password:
1.
Select a unique password of 8 to 16 characters.
2.
With the default menu displayed, press
3.
Press
to display Change Password?
4.
Press Enter for yes.
The default password, AAAAAAAA~~~~~~~~, is displayed.
5.
Press
or
6.
Press
to accept this character and select the next character.
7.
Repeat the process to enter the remaining password characters.
8.
Press Enter to enter the password and return to the default display.
Installing HP Command View EVA
HP Command View EVA is installed on a management server. Installation may be skipped if the latest
version of HP Command View EVA is running. Verify the latest version at the HP website:
http://h18006.www1.hp.com/products/storage/software/cmdvieweva/index.html
See the HP StorageWorks HP Command View EVA installation guide for information on installing the
software.
Installing optional EVA software licenses
If you purchased optional EVA software, it will be necessary to install the license. Optional software
available for the Enterprise Virtual Array includes HP Business Copy EVA and HP Continuous Access
EVA. Installation instructions are included with the license.
44
Enterprise Virtual Array startup
to select the desired character.
three times to display System Password.