HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual page 96

Information type
Coupled Crash Control Codes
Dump/Restart Control Codes
Corrective Action Codes (CAC)
Software Component ID Codes
(SWCID)
Event Information Packets (EIP)
96 Controller fault management
This single digit, decimal character defines the requirement for the other
controller to initiate a coupled crash control.0. Other controller SHOULD
NOT complete a coupled crash.1. Other controller SHOULD complete a
coupled crash.
This single decimal character (0, 1, 3) defines the requirement to:0. Per-
form a crash dump and then restart the controller.1. DO NOT perform a
crash dump; just restart the controller.3. DO NOT perform a crash dump;
DO NOT restart the controller.
These hexadecimal codes supplement the Termination Code information
to identify the faulty element and the recommended corrective action.
These decimal codes identify software associated with the event.
These codes specify the packet organization for specific type events.
Description