Using The Ocp; Displaying The Ocp Menu Tree - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

covers or dust caps provided by the manufacturer. These covers are removed during installation, and
are installed whenever the transceivers or cables are disconnected. Cleaning the connectors should
remove contamination.
The transceiver dust caps protect the transceivers from contamination. Do not discard the dust covers.
CAUTION:
To avoid damage to the connectors, always install the dust covers or dust caps whenever a transceiver
or a fiber cable is disconnected. Remove the dust covers or dust caps from transceivers or fiber cable
connectors only when they are connected. Do not discard the dust covers.
To minimize the risk of contamination or damage, do the following:
• Dust covers — Remove and set aside the dust covers and dust caps when installing an I/O module,
a transceiver or a cable. Install the dust covers when disconnecting a transceiver or cable.
• When to clean — If a connector may be contaminated, or if a connector has not been protected
by a dust cover for an extended period of time, clean it.
• How to clean:
1. Wipe the connector with a lint-free tissue soaked with 100% isopropyl alcohol.
2. Wipe the connector with a dry, lint-free tissue.
3. Dry the connector with moisture-free compressed air.
One of the many sources for cleaning equipment specifically designed for fiber optic connectors is:
Alcoa Fujikura Ltd.
1-888-385-4587 (North America)
011-1-770-956-7200 (International)

Using the OCP

Displaying the OCP menu tree

The Storage System Menu Tree lets you select information to be displayed, configuration settings to
change, or procedures to implement. To enter the menu tree, press any navigation push-button when
the default display is active.
The menu tree is organized into the following major menus:
• System Info—displays information and configuration settings.
• Fault Management—displays fault information. Information about the Fault Management menu is
included in
• Shutdown Options—initiates the procedure for shutting down the system in a logical, sequential
manner. Using the shutdown procedures maintains data integrity and avoids the possibility of
losing or corrupting data.
• System Password—create a system password to ensure that only authorized personnel can manage
the storage system using HP Command View EVA.
To enter and navigate the storage system menu tree:
1. Press any push-button while the default display is in view. System Information becomes the active
display.
54 EVA6400/8400 operation
Controller fault management.