Menu Options Within The Ocp Display - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual

2. Press to sequence down through the menus.
Press to sequence up through the menus.
Press to select the displayed menu.
Press to return to the previous menu.
NOTE:
To exit any menu, press Esc or wait ten seconds for the OCP display to return to the default display.
Table 15 identifies all the menu options available within the OCP display.
CAUTION:
Many of the configuration settings available through the OCP impact the operating characteristics of
the storage system. You should not change any setting unless you understand how it will impact system
operation. For more information on the OCP settings, contact your HP-authorized service representative.
Table 15 Menu options within the OCP display
System Information
Versions
Host Port Config
(Sets Fabric or Direct
Connect)
Device Port Config
(Enables/disables device
ports)
I/O Module Config
(Enables/disables
auto-bypass)
Loop Recovery Config (En-
ables/disables recoveries)
Unbypass Devices
UUID Unique Half
Debug Flags
Print Flags
Mastership Status (Displays
controller role — master or
slave)
Fault Management
Last Fault
Detail View
HP StorageWorks 6400/8400 Enterprise Virtual Array user guide
Shutdown Options System Password
Restart Change Password
Power Off Clear Password
Current Password
Uninitialize System
(Set or not)
55