HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual page 78

Status Code Value
86
Command View EVA has
detected this array as
inoperative. Contact HP
Service for assistance.
87
Disk group inoperative or
disks in group less than
minimum.
88
Storage system inoperative
89
Failsafe Locked
90
Data Flush Incomplete
91
Redundancy Mirrored
Inoperative
92
Duplicate LUN
93
Other remote controller failed
94
Unknown remote Vdisk
95
Unknown remote DR group
96
PLDMC failed
78 Error messages
Meaning
Case 1: A virtual disk is in an inoperat-
ive state and the request cannot be pro-
cessed.
Case 2: The snapclone cannot be asso-
ciated with a virtual disk that is in an in-
operative state. 86 Command View EVA
has detected this array as inoperative.
Contact HP Service for assistance.
Case 3: The snapshot cannot be associ-
ated with a virtual disk that is in an inop-
erative state. Report the error to product
support.
The disk group is in an inoperative state
and cannot process the request.
The storage system is inoperative and
cannot process the request.
The request cannot be performed be-
cause the Continuous Access group is in
a failsafe locked state.
The disk cache data need to be flushed
before the condition can be resolved.
The disk group is in a redundancy
mirrored inoperative state and the re-
quest cannot be completed.
The LUN number is already in use by
another client of the storage system.
While the request was being performed,
the remote storage system controller
failed.
The remote storage system specified does
not exist.
The remote Continuous Access group
specified does not exist.
The disk metadata was unable to be
updated.
How to Correct
Report the error to product support.
Report the error to product support.
Report the error to product support.
Resolve the condition and retry the
request.
Retry the request later.
Report the error to product support.
Select another LUN number and
retry the request.
Resolve the condition and retry the
request. Report the error to product
support.
Correctly select the remote storage
system and retry the request.
Correctly select the remote Continu-
ous Access group retry the request.
Resolve the condition and retry the
request. Report the error to product
support.