HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual page 72

Status Code Value
26
Parameter Object Does Not
Exist
27
Target Object Does Not Exist
28
Timeout
29
Unknown Id
30
Unknown Parameter Handle
31
Unrecoverable Media Error
32
Invalid State
33
Transport Error
72 Error messages
Meaning
Case 15: GROUP discard: The
Continuous Access group cannot be
discarded as one or more virtual disk
members exist.
The operation cannot be performed be-
cause the object does not exist. This can
indicate a user or program error.
VOLUME set requested usage: The disk
volume set requested usage cannot be
performed because the disk group does
not exist. This can indicate a user or
program error.
Case 1: The operation cannot be per-
formed because the object does not ex-
ist. This can indicate a user or program
error.
Case 2: DERIVED UNIT discard: The
operation cannot be performed because
the virtual disk, snapshot, or snapclone
does not exist or is still being created.
Case 3: VOLUME set requested usage:
The operation cannot be performed
because the target disk volume does not
exist. This can indicate a user or
program error.
Case 4: GROUP get name: The
operation cannot be performed because
the Continuous Access group does not
exist. This can indicate a user or
program error.
A timeout has occurred in processing the
request.
The supplied storage cell identifier is in-
valid. This can indicate a user or pro-
gram error.
The supplied parameter handle is un-
known. This can indicate a user or pro-
gram error.
The operation could not be completed
because one or more of the disk media
had an unrecoverable error.
This error is no longer supported.
A SCMI transport error has occurred.
How to Correct
Report the error to product support.
Case 1: Report the error to product
support.
Case 2: Retry the request at a later
time.
Case 3: Report the error to product
support.
Case 4: Report the error to product
support.
Verify the hardware connections
and that communication to the
device is successful.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Report the error to product support.
Verify the hardware connections,
communication to the device, and
that the management software is
operating successfully.