Handwheel
The handwheel
controls
the height of the
radial arm.
To raise the radial arm, turn the handwheel
clockwise.
To lower the radial arm, turn the
handwheel
counterclockwise.
(Figure
34)
Fig. 34 - Handwhee!
One complete turn of the handwheel moves
the arm 1/16 inch.
The handle
can be folded in by pushing
the
red button
while pushing
the handle
in.
All Controls
Always lock the miter,
swivel and bevel locks
before
making
a cut on your radial arm saw.
When
ripping,
the rip lock must also be lock-
ed. When
crosscutting,
the rip lock should be
locked
before
and after each cut, when the
saw is in the rearmost
position.
16