Bevel Lock - Craftsman 113.198111 Operator's Manual

Bevel Lock
l-he bevel lock is used to hold the blade at
various angles to the table. To unlock the
bevel lock, move the lock to the right. Always
hold the motor when you unlock the bevd
lock. (Figure 28)
,CAUTION: The motor is heavy and
can swing down quickly. You can be cut
or injured by the arbor shaft or blade.
Hold the motor when you unlock the
bevel lock.
Fig. 26 - Miter Lock - Unlocked
To lock the miter lock, push the lock to the
left. (Figure 27)
Fig. 28 - Bevel Lock - Unlocked
Fig. 27 - Miter Lock - Locked
There are three pre-set miter angles at 45 °,
0°, and -45 °. You will feel the radial arm
snap into position at these miter angles. To
unlock the arm when it is in one of these pos>
tions, pull the miter lock all the way to the
right and move the ann as you hold the lock
in this position.
To lock the bevel lock, move the lock to the
left. (Figure 29)
14