Printing-Related Troubleshooting - Epson Stylus Pro GS6000 User Manual

EPSON Stylus Pro GS6000

Printing-related troubleshooting

Note:
Proper print quality may not be obtained with the paper other than the recommended one.
Printing is partially stained or incomplete
Cause
Does the paper contain moisture?
Are you using folded or wrinkled
paper?
Does the paper bend?
The printing position is incorrect (some parts of the paper cannot be printed on)
Cause
Is the loading position of the paper
correct?
Did you set up the origin and print
position?
Printing is blurred
Cause
Are you using the recommended
paper?
Are you using a thick or thin paper?
Is the paper printed on the printing
surface?
Did you perform head alignment?
Did you perform Paper Feed
Adjustment?
Is each heater set to the
appropriate temperature?
Is the head height set to High?
User's Guide
Problem Solver
What to do
Replace it with new paper.
See "Replacing Roll Paper" on page 39
Use the recommended paper. When using paper other than the
dedicated one, set the Paper Suction in the Paper Setup menu.
For details of the recommended paper, contact your local Epson
customer support.
See "Details of PAPER SETUP" on page 21
What to do
Set the paper correctly.
See "Setting roll paper" on page 35
Cancel or reset the settings of the origin and print position.
What to do
Use the recommended paper.
For details of the recommended paper, contact your local Epson
customer support.
Use the recommended paper.
For details of the recommended paper, contact your local Epson
customer support.
Confirm the printing surface of the paper and set it correctly.
See "Using Roll Paper" on page 32
Perform head alignment.
See "Print head alignment" on page 47
Perform paper feed adjustment.
See "Adjusting Paper Feed" on page 48
Set it to the appropriate temperature.
See "Details of PAPER SETUP" on page 21
Return the head height to "Normal (Low)".
See "Head height adjustment" on page 42
79