Epson Stylus Pro GS6000 User Manual page 49

EPSON Stylus Pro GS6000
D
Perform initial adjust print.
Note:
If you increase the feeding length, the accuracy
of the paper feed adjustment improves;
however, it wastes the paper.
1. Press the /
FEED ADJUST, and then press the
2. Press the /
FEED ADJUST, and then press the
3. Press the /
length from 100mm, 250mm, or 500mm. Then
press the button.
4. Press the button to print initial
adjustment.
After printing the initial adjustment, cut the
paper.
E
Measure the distance between the two
pluses in the initial adjustment print using
a ruler.
F
Set the initial adjustment value.
1. Press the /
measured value in step 4.
2. Press the button to save the initial
adjustment value.
User's Guide
Adjust Printing
button to display PAPER
button.
button to select LINE
button.
button to select the feed
button to select the
G
Print a sample pattern.
1. Press the
SAMPLE PATTERN, and then press the
button.
2. Press the
pattern.
After printing the sample pattern, cut the
paper.
H
Refer to the illustrations below and check
the printing result.
49
/ button to select PRINT
button to print a sample