Using The Printer Software; Introduction; Epson Network Utility; Epson Lfp Remote Panel - Epson Stylus Pro GS6000 User Manual

EPSON Stylus Pro GS6000
Using the Printer
Software

Introduction

The printer software CD-ROM includes the
following software.
❏ EPSON Network Utility
❏ EPSON LFP Remote Panel
❏ EpsonNet Config
❏ EpsonNet Print
Note:
These software only run on Windows.

EPSON Network Utility

EPSON Network Utility needs to be installed
when using EPSON LFP Remote Panel via a
network.

EPSON LFP Remote Panel

EPSON LFP Remote Panel gives the user a broad
range of control over the printer, to obtain better
print quality in printing.
After installing the software, see its online help
for detailed information.
Note:
When Set up the printer via a local connection or
Set up the printer via a network connection is
executed with the software CD-ROM, EPSON
Communication Driver (EPSON Stylus Pro GS6000)
is automatically installed. This driver is not for
printing but for activating EPSON LFP Remote
Panel.
User's Guide

Using the Printer Software

30

EpsonNet Config

EpsonNet Config is a Windows-based
configuration software for administrators to
configure the network interface for TCP/IP,
NetWare, MS Network, AppleTalk, IPP, and
SNMP.
See Network Guide for detailed information of this
software.

EpsonNet Print

EpsonNet Print is a utility program that provides
peer to peer printing to Epson printers on the
TCP/IP network.
By using EpsonNet Print, you can find a printer
located in the same segment or beyond a router.
You can select LPR standard printing, LPR
enhanced printing, or High-speed printing.
See Network Guide for detailed information of this
software.