Handling Paper; Using Roll Paper; Loading Roll Paper - Epson Stylus Pro GS6000 User Manual

EPSON Stylus Pro GS6000

Handling Paper

Using Roll Paper

This section explains how to handle the printer.
Note:
❏ See the following for details about handling paper.
"Paper" on page 40
❏
Do not open the front cover during printing. If
the front cover is opened, printing will be
interrupted. Printing restarts if you close the
front cover. However, you are not guaranteed to
have high print quality.
Warning:
w
❏ The roll paper is heavy so have two people set
the roll paper.
❏ Do not touch the paper guide during
printing. It is hot and may cause a burn.
❏ Do not touch the paper feed slot, platen, or
paper guide while heaters are operating.
They are hot and may cause a burn.
❏ Keep the work area well-ventilated. This
prevents fire, and stops operators from
feeling sick from bad smell or fumes.
❏ Do not store combustible materials on the
platen while performing the heater
operation. It could lead to fire.
❏ Do not spill flammable liquid over the
platen. This could lead to fire.
User's Guide
Handling Paper
32

Loading roll paper

This section explains how to load roll paper.
Put the roll paper in the center.
Note:
The following roll paper can be attached to the printer:
the core diameter is three inches, outside diameter of
paper is 150 mm or less, weight is 30 kg or less.
A
Loosen the fixing levers on the right and left
side of the rear. Set the distance between
the roll paper holders wider than the roll
paper width.
B
Fix the roll paper holder (Left).