Replacing Roll Paper - Epson Stylus Pro GS6000 User Manual

EPSON Stylus Pro GS6000

Replacing Roll Paper

This section describes when and how to replace
roll paper.
Replace roll paper in the following situations.
❏ When the roll paper loaded in the printer runs
out
❏ When you want to change the paper type to
use
A
If the printer is turned on, confirm that
operation such as printing is not in
progress.
B
Make sure that the Power light is not
flashing, and then raise the paper lever.
C
Turn the flanges of the roll paper holders
and wind the roll paper.
User's Guide
Handling Paper
39
D
Loosen the lever of the right roll paper
holder and remove it away from the paper.
E
Take the same procedure as in step 4,
remove the roll paper from the left roll
paper holder.
F
To load another roll paper, see the
following.
"Using Roll Paper" on page 32
For storing roll paper not in use, see the
following.
"Precautions on storing paper" on page
40