Regular Maintenance; Cleaning The Cleaning Wiper - Epson Stylus Pro GS6000 User Manual

EPSON Stylus Pro GS6000
H
Install the new flushing pad. Set the
flushing pad until it clicks into place.
I
Close the right maintenance cover firmly
until it is locked.
User's Guide
Maintenance and Move or Transportation
60

Regular Maintenance

Cleaning the cleaning wiper

Clean the cleaning wiper once a month, or when
blurs or lacking parts appear on printed paper
after head cleaning.
Note:
❏ Use the cleaning stick that comes with the
printer to clean the cleaning wiper.
See "Maintenance Kit" on page 53
❏ When cleaning the cleaning wiper, the print
head cap must be removed and cleaning must be
complete before the head dries. We recommend
finishing the cleaning within 15 minutes to
prevent the head from drying.
A
Turn on the printer.
B
Press the button to enter the Menu
mode.
C
Press the /
MAINTENANCE, and then press the
D
Press the /
CARRIAGE MAINTENANCE, and then press the
button.
button to display
button.
button to display