Built-In Software In The Printer - Epson SC-F2200 Series User Manual

SC-F2200 Series User's Guide
Software Name
*
Install Navi
EpsonNet Config SE
(Windows only)
* Download and install the software from the Internet. Connect your computer to the Internet and install the software.
Note:
When using this printer with a Mac, EPSON Software Updater only receives updates for software (such as Garment
Creator 2), not firmware updates.
Check Epson Edge Dashboard for firmware updates and update as necessary.
See the Epson Edge Dashboard manual for more details.

Built-in Software in the Printer

The following software comes preinstalled in the printer. Start and use it from a Web browser via the network.
Software Name
Web Config
Introduction
Summary
This is the installer. During installation, you can easily use a wizard to set the address settings
for connecting to a network.
With this software, you can configure various network settings for the printer from your
computer. This is useful as it allows you to enter addresses and names using the keyboard.
Function
This software is for network administrators.
The network security settings can be configured from Web Config. This software also
has an email notification function for notifying of printer errors and other problems.
"Using Web Config" on page 33
30