Chery QQ6 Service Manual page 45

Hide thumbs Also See for QQ6:
Table of Contents

Advertisement

for unleaded gasoline.
Note:
If the engine is working all
the times, the 3-way catalytic
converter will become very
hot. Therefore, remember to
wear protective glove during
maintenance to avoid scald.
Drive a car equipped with
the catalytic converter
Avoid any case that may cause
unburned or partly unburned fuel to
enter the catalyst, especially when the
engine is at a high temperature.
Avoid the following cases:
Fuel is exhausted.
Unnecessary and long starting of
the engine.
Let the engine run with one of the
spark-plug cable joints removed.
Start the car whose engine is still
at the working temperature by
pushing or towing.
Turn off the ignition switch
during running.
Driving
Parking
During driving, drive the
car at a lower speed to the
nearest Chery Authorized
It is absolutely unallowable to
Service Station in case of poor
pull out the ignition cable of
ignition or performance fall of the car.
the ignition coil to check if the
Be sure not to drive at a high speed.
working status of the engine is normal
or to observe the spark jump status of
the spark plug by means of cylinder
flameout;
otherwise,
the
catalytic converter may be damaged.
Do not park, idle or drive the car on dry
leaves or hay. Potential fire hazard still
exists even if the engine is flameout,
because the exhaust gas will still emit
considerable heat in a short time.
Be sure to turn off the ignition switch
before leaving the car. Do not leave the
engine run with nobody inside the car.
If you neglect this point, your car may
move by chance, which may cause
3-way
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents