Chery QQ6 Service Manual page 23

Steering Wheel Lock &
Ignition Switch
The built-up type steering wheel
lock/ignition switch includes
following key positions:
B
--the ignition switch is turned off, and
the steering wheel is locked.
When the key is drawn out from the
ignition switch, the steering wheel lock
will be activated to lock up the steering
wheel.
To lock the steering wheel, after
removing the lock, the steering wheel
shall be turned slightly until you hear
the engage sound of steering wheel
locking.
I
-- Steering system unlocked. The
circuits of electrical accessories are
switched on to operate the audio,
cigarette lighter, wiper and other
electric appliances. But the ignition
switch and primary electrical circuits
power off.
the
If it fails or is difficult to turn the key
from the LOCK position to this
position, you can slightly turn the
steering wheel to the left and right, and
then the steering
mechanism will be able to release.
The key of ignition switch shall not be
placed this position for a long time to
avoid using up the power of battery.
– Switch on the ignition circuit to
II
enable all electrical circuits to work.
Both warning lamp and indicator light.
This is the proper position of key
during driving, and also is the position
that must be selected when the vehicle
is trailed.
III –
and start up the engine.
When the locking hole is in this
position, the wiper, audio and other
electrical
electric power consumption all be
switched off to ensure the vehicle starts
up.
wheel locking
There is a restart proofing equipment
inside the ignition switch. Once the
engine operates, this equipment can
prevent the starter from false startup to
To switch on the starting motor,
apparatuses with large
23