Replacing The Toner Cartridge; Using The Toner Save Mode - Xerox Phaser 3117 User Manual

4.5
M Y
AINTAINING

Replacing the Toner Cartridge

If the print remains light after redistributing toner (see
page 4.3), replace the toner cartridge.
Remove the old cartridge and install a new toner cartridge. See
"Installing the Toner Cartridge" on page 2.4.

Using the Toner Save Mode

The Toner Save mode allows the printer to use less toner on
each page. Selecting this option will extend the life of your toner
cartridge and reduce your cost per page, but will reduce print
quality.
There are two ways to enable the Toner Save mode:
From the Control Panel
Press the button on the control panel. The printer must
be in Ready mode (
• If the LED is on, the mode is enabled and the printer
uses less toner to print a page.
• If the LED is off, the mode is disabled and the printer
prints in the normal mode.
From the Printer Properties
You can also enable the Toner Save mode in the Graphic tab of
the printer properties. For details, see Software User Guide.
P
OUR RINTER
green LED is on).