Changing Status Monitor 2 Settings - Epson STYLUS Color 850Ne User Manual

Managing Print Jobs
Note:
You may not see screens
for all the steps here,
depending on your
computer's configuration.
Write down your settings
in the spaces provided.
You can refer to them if
multiple systems are
monitoring the printer.
4. Select
Monitor from restart
monitoring on the printer after your next system restart),
(to begin background monitoring right
Monitor now
away), or
Stop monitoring now
monitoring).
5. Now set your monitoring preferences for the printer as
described on page 4-3.

Changing Status Monitor 2 Settings

You can run through the Setup program and change your
settings without uninstalling and reinstalling Status Monitor 2.
This procedure allows you to change any of the following
settings:
Number of hops
Types of printers you can monitor
EPSON TCP/IP printing
You can also run this program any time you install the printer
software and Status Monitor 2 is unable to find the printer.
Follow these steps to change your settings:
1. In Windows Explorer or My Computer, find the folder
where your EPSON Status Monitor 2 files are located
(ESM2 is the default) and double-click
2. Close any open programs and click
3. If you are using Windows 98 or Windows 95 and you have
TCP/IP installed, you see a screen asking you if you want to
enable EPSON TCP/IP printing. Select
print with TCP/IP, and then click
with Novell NetWare, select
TCP/IP Printing:
4-8
(to begin background
(to stop background
Setup.exe
Next
Yes
. If you are printing
Next
.
No
Yes_______ No_______
.
.
if you want to