Solving Miscellaneous Printout Problems - Epson STYLUS Color 850Ne User Manual

Paper doesn't eject fully or is wrinkled.
Possible cause
If the paper doesn't eject
fully, you may have set the
wrong paper size.
If it's wrinkled when it
comes out, the paper may
be damp or too thin.
Characters are incorrect or garbled.
Possible cause
Your printer is not selected
in your application or as the
Windows default printer.
Your printer is not selected
in the Macintosh Chooser.
Printing is stalled.
The network cable is not
securely connected.
Your video driver may be
conflicting with the EPSON
printer driver.
Solution
E
Press the load/eject button to eject the paper. Then make sure
you select the correct paper size in your printer software. See
Chapter 3 for instructions.
See the paper specifications in Appendix B for ranges of paper
thicknesses you can print with, as well as environmental
requirements for storage.
Solving Miscellaneous Printout
Problems
If your printout results are not what you expected, try these
solutions.
Solution
Select your printer in your application or select it as the default
Windows printer. See your Windows documentation or online
help for instructions.
Select your printer in the Chooser as described in the Setup
Guide .
In Windows, delete the stalled print jobs in Spool Manager (in the
spooler for Windows NT). On a Macintosh, select the stalled print
jobs in Monitor3, or open the Extensions folder, EPSON folder,
and Spool folder; then delete any queued files. See Chapter 4 for
instructions.
Turn off your printer and computer. Then make sure the network
cable is connected securely and meets the Ethernet card's
specifications.
Change to a standard VGA driver (see your computer or video
card documentation for instructions). If your printout is correct,
your video driver is interfering with the printer driver. Contact
your computer or video card manufacturer for an updated driver.
6-15
Troubleshooting