Epson STYLUS Color 850Ne User Manual page 108

Possible cause
Printing is stalled.
The print heads are clogged
or the ink cartridges are too
old.
The S paper out light is flashing or on.
Possible cause
If flashing, paper is jammed.
If on, paper is used up or is
loaded incorrectly.
A B black or A color ink out light is flashing or on.
Possible cause
If flashing, the ink supply is
getting low.
If on, the ink cartridge is
empty.
The S and P lights are flashing.
Possible cause
A carriage error has
occurred.
Solution
In Windows 98/95/3.1x, delete the stalled print jobs in Spool
Manager; see Chapter 4 for instructions. In Windows NT, use the
spooler.
On a Macintosh, delete stalled print jobs using Monitor3 or open
the Extensions folder, EPSON folder, and Spool folder; then
delete any queued files.
Clean the print heads by running a cleaning cycle; see Chapter 5
for instructions. If cleaning doesn't help, replace the cartridges.
For information on cartridge life and replacement instructions, see
Chapter 5.
Solution
Remove the paper and follow the guidelines for preventing jams
as described on page 6-14.
Load paper or remove the stack and reload it as described in the
Setup Guide and in Chapter 2. Then press the
to turn off the light and resume printing.
Solution
You need to replace the indicated ink cartridge soon; see
Chapter 5 for instructions.
You must replace the indicated ink cartridge now to be able to
print; see Chapter 5 for instructions.
Solution
Remove any paper in the printer. Press the
about 30 seconds. Then press it again. Turn the printer off, wait a
few seconds, and then turn it on and try printing again. If the error
is not cleared, contact EPSON as described in the Introduction.
6-9
Troubleshooting
E
load/eject button
E
load/eject button for