Epson STYLUS Color 850Ne User Manual page 110

The printer software installed with Windows 3.1 doesn't work correctly
after you upgrade to Windows 98 or Windows 95.
Possible cause
Your printer software is not
set up correctly for
Windows 98 or
Windows 95.
After you install your printer software, you see the Windows 95 or
Windows 98 New Hardware Found window.
Possible cause
An operating system error
has occurred.
You see a spooling error message (Windows).
Possible cause
If you see error messages
or printing is very slow, the
problem may be caused by
temporary files (Windows
3.1 only).
Your hard drive is too full.
Your computer doesn't
have enough memory for
the file you're printing.
You see a memory error message (Macintosh).
Possible cause
You need to increase the
memory allocation for your
application, EPSON
Monitor3, or both.
Solution
After installing Windows 98 or Windows 95, uninstall the printer
software as described on page 6-17, then reinstall the printer
software, as described in the Setup Guide .
Solution
Click Do not install a driver , and then click OK . Never select any
other option on the New Hardware Found window.
Solution
Change the Spool Manager default directory (Windows 3.1 only),
following the instructions in Chapter 4.
Delete unnecessary files to make room on the drive.
Try one of the following:
Reduce the resolution of your image.
Select fewer colors or a lower resolution for your display or
monitor.
Add more memory to your computer.
Solution
Choose Get Info from the File menu when the application is active
or EPSON Monitor3 is selected and increase the memory
requirements. See Chapter 4 for more information. If that doesn't
work, turn off background printing if it's on (you won't be able to
use Monitor3).
6-11
Troubleshooting