Adding Devices; Refresh; Select All; Open Device Home Page - Kyocera FS-2100DN User Manual

Adding Devices

1
2
3
4

Refresh

Select All

Open Device Home Page

Status Filter

KMnet Admin 3.0
A device can be added manually if is not automatically discovered. This is
useful if a device is located on a remote network that is not set up for automatic
discovery.
In List view or Map view, click Add device.
In the Add Devices dialog box, add selected targets:
You can type the IP address or host name of the device, and click Add.
You can paste IP addresses or host names from your clipboard by clicking
Paste.
You can add IP addresses or host names from a text file. Click Import, and
then click Browse to select a file with a .TXT or .CSV extension.
You can click Remove to delete any devices in your Selected targets list.
Click OK to submit the Selected targets list. The Add Devices Result dialog
box appears with a status of all the devices submitted. A Details link refers you
to the IP address or host name for each device submitted.
Click Close.
Printing device information, such as counters and toner levels, are automatically
updated according to the polling schedule. At any time, you can manually
update this information by clicking Refresh. This process may take a few
minutes.
Click Select all to select all displayed printing devices. Select all selects the
devices currently displayed. Moving to another page to view additional devices
will clear your current selection. This feature is available in List view.
Click Device home page to open software on the device. Detailed device and
status information, panel settings and device controls are available in the device
software.
To access a device home page on a remote network, open the Administration
console and select Preferences > Networks and agents, highlight the remote
network, click the Network Properties icon and select the Agent tab. In the
Agent tab, select Use proxy function to open Device Home Pages.
Port 80 is used by default to access the home page through HTTP. Port 443 is
used by default to access the home page through HTTPS.
You can set a filter that lets you view only the devices in a group that match a
user-selected status.
Device Manager
3-14