Changing Security Functions - Kyocera TASKalfa 8000i Operation Manual

Changing Security Functions

Changing Security Password
Enter the security password to change security functions. You can customize the security password so that only
the administrator can use the security kit.
Use the procedure below to change the security password.
System - Security Password
Set password.
Enter new password, then re-enter it to confirm.
Password
Confirm
Password
Status
# Keys
# Keys
Cancel OK
1
Press the System Menu key.
2
Press [System].
3
If user login is disabled, the user authentication
screen appears. Enter your login user name and
password and then press [Login]. For this, you
need to log in with administrator privileges. Refer to
the machine's Operation Guide for the default login
user name and password.
4
Press [Next] of Data Security.
5
Press [Next] of Hard Disk Initialization.
6
Enter the default security password, 000000.
7
Press [Change] of Security Password.
8
Press [Password] to enter a new security password
6 to 16 alphanumeric characters.
CAUTION:
Avoid any easy-to-guess numbers for the
security password (e.g. 11111111 or 12345678).
9
Press [Confirm Password] to enter the same
password again.
10
Press [OK].
7