Updating Device Summary Information - Kyocera TASKalfa 650c Operator's Manual

4 MONITORING DEVICE STATUS
Staples Empty
This icon indicates no staples are left in the Finisher. For information on resolving the error condition, refer to "Refilling
the Staple" in Troubleshooting Guide.
Call for Service
Contact your service representative to have the equipment inspected.

Updating Device Summary Information

When you want to manually update the device status information, either select View > Refresh, or click the printer icon on
the right side of the status bar.
To change the auto-update settings, see the following section:
P.50 "Changing Refresh Rates"
30 Checking Device Status