2 SETTING ITEMS (ADMIN)
Setting the IPv6 protocol automatically (in a stateless network environment)
Press [NETWORK] in the ADMIN menu.
1
The NETWORK menu is displayed.
To display the ADMIN menu, see the following page:
P.63 "Entering Admin Menu"
Press [IPv6].
2
The IPv6 screen is displayed.
Specify the following items as required and press
3
IPv6 PROTOCOL — Press [ENABLE] to enable the IPv6 protocol, or [DISABLE] to disable the IPV6 protocol.
LLMNR — Press [ENABLE] to enable the LLMNR (Linklocal Multicast Name Resolution) protocol, or [DISABLE] to
disable the LLMNR protocol.
ADDRESS MODE — Select [STATELESS].
Link Local Address — The unique address used for the IPv6 is displayed.
The link local address cannot be connected to another routed IPv6 network.
[ENABLE] and [DISABLE] for the LLMNR protocol are available when you select [ENABLE] for the IPv6
protocol.
94
Setting Network Functions
.