Kyocera TASKalfa 650c Management Manual page 83

2.SETTING ITEMS (ADMIN)
Setting the copy calibration
Press [COPY].
1
Press [DEFAULT] to set the default calibration setting, or [CALIBRATION] to adjust the
2
calibration setting.
When you press [DEFAULT], the system maintains the default calibration setting and returns to the previous
screen.
When you press [CALIBRATION], a chart is printed out and the calibration guide illustration is displayed on the
touch panel.
Place the printed chart face down on the glass with the bottom toward you and the top
3
left aligned against the original scale on the left side, so that two black rectangular
marks are placed on the left side.
4 Press the [START] button on the control panel.
When the calibration setting is completed, the GENERAL menu will be displayed.
If the chart is not properly placed, the message "Set chart correctly" is displayed on the touch panel. In this
case, return to step 3 and realign the chart.
2 SETTING ITEMS (ADMIN)
Setting General Functions 81