Kyocera TASKalfa 650c Management Manual page 148

2 SETTING ITEMS (ADMIN)
Specify the following items as required and press [Next].
2
[EAP-USER NAME] — Press this button to enter the EAP-User name.
[PASSWORD] — Press this button to enter the authentication password.
[RETYPE PASSWORD] — Press this button to re-enter the authentication password.
When you press the above buttons, the on-screen keyboard is displayed. Enter a value using the keyboard and
digital keys, and press [OK] to set the entry.
3 Confirm the settings and press [APPLY NOW].
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
[CRL Verification] shows whether the certificate revocation list (CRL) is enabled or disabled. To use CRL, it is
necessary to upload the certificate revocation list to the equipment from the COMMAND CENTER - Security
Service menu. Changing the CRL verification option from [Enable] to [Disable] or vice versa is also performed
from COMMAND CENTER. For details, refer to the COMMAND CENTER Guide.
146 IEEE 802.1X Authentication Setting