Kyocera TASKalfa 650c Management Manual page 107

2.SETTING ITEMS (ADMIN)
Specify the following items as required and press [OK].
3
ENABLE APPLETALK — Press [ENABLE] to enable the AppleTalk, or [DISABLE] to disable the AppleTalk.
[DEVICE NAME] — Press this button to enter the AppleTalk name of this equipment.
[DESIRED ZONE] — Press this button to enter the AppleTalk zone name this equipment has joined. If your
AppleTalk network has not been configured with a zone, you do not have to enter the zone name.
When you press [DEVICE NAME] and [DESIRED ZONE], the on-screen keyboard is displayed. Enter a value
using the keyboard and digital keys, and press [OK] to set the entry.
Continue to another network setting if required, then press [APPLY NOW].
4
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
2 SETTING ITEMS (ADMIN)
Setting Network Functions 105