Kyocera TASKalfa 650c Management Manual page 84

2 SETTING ITEMS (ADMIN)
Setting the print calibration
Press the following buttons as required.
1
Press either of the following buttons.
[600dpi PRINT]
Press this button to calibrate for the 600 dpi print jobs.
[1200dpi PRINT]
Press this button to calibrate for the 1200 dpi print jobs.
Press [DEFAULT] to set the default calibration setting, or [CALIBRATION] to adjust the
2
calibration setting.
When you press [DEFAULT], the system maintains the default calibration setting and returns to the previous
screen.
When you press [CALIBRATION], a chart is printed out and the calibration guide illustration is displayed on the
touch panel.
Place the printed chart face down on the glass with the bottom toward you and the top
3
left aligned against the original scale on the left side, so that two black rectangular
marks are placed on the left side.
82 Setting General Functions