Kyocera TASKalfa 650c Management Manual page 143

2.SETTING ITEMS (ADMIN)
The user certificate installed in this equipment is displayed. Confirm the certificate and
3
press [Next].
Confirm the settings and press [APPLY NOW].
4
The "NETWORK INITIALIZING" message is displayed and this equipment starts initializing the network interface
card to apply the changes.
[CRL Verification] shows whether the certificate revocation list (CRL) is enabled or disabled. To use CRL, it is
necessary to upload the certificate revocation list to the equipment from the COMMAND CENTER - Security
Service menu. Changing the CRL verification option from [Enable] to [Disable] or vice versa is also performed
from COMMAND CENTER. For details, refer to the COMMAND CENTER Guide.
2 SETTING ITEMS (ADMIN)
IEEE 802.1X Authentication Setting 141