Panasonic Viera TC-P46G25 Operating Instructions Manual page 45

(continued)
[IP setting]
(_ Select "IP setting mode" and set to
"Automatic"
(WhenIP automaticacquisition inDHCP can be used)
The acquired address is displayed.
@_Each IP address is acquired automatically
[DNS settings]
Select "DNS setting mode" and set to "Automatic"
(WhenDNSautomatic acquisition in DHCPcan be used)
mmmmmmmm
The acquired address is displayed.
_ Each IP address is acquired automatically
Ifyou areusinga broadband r outer,IPautomatic acquisition inDHCPcanbe
usedundernormal c ircumstances. If youarenotsure,checkwiththeperson
whoinstalled the equipment, or checkthe instructions for eachdevice.
Set only if specified by the provider.
It is not required for normal household use.
• Proxy address
This is theaddressof the relay serverthat is connectedto the target
serverinsteadof the browserandsends datato the browser.
Setting is only required if specified by the provider.
Select "Proxy address" and press OK
(_ Enter address
• Manual setting
_1_Select "IP setting mode" and set to "Manual"
Select the item and press OK
Check the specifications of the broadband router
and enter each IP address
_ or
• Manual setting
(_ Select "DNS setting mode" and set to "Manual"
_2_ Select the item and press OK
_3_ Enter each IP address as was specified by the
provider
_ or
• Proxy port
This number is specified by the provider together with
the Proxy address.
_i_Select "Proxy port" and press OK
_2_Enter the Port number
Proxy port
_;,_ _t _ or
(see "Entering characters" on p. 19)
Select "OK"
Network camera setting (p. 29)
Select "Software u
If you perform the Proxy settings, it may make it
impossible to view VIERA CAST movie content.
Press OK to start the Software update screen
_3_ Follow directions on the screen
* Set "Clock" first. (p. 17)
@
Z
('I)
o
03
('I)
.5"
0o
@ The Network settings become effective when you close the menu and run "Connection test".
45