Auto channel setup (ANT/Cable
setup)
Select
the connected
Antenna
in terminal
Not used: Go to Q
(Labet inputs)
Select "Not used" when no wire is connected to the "Antenna/Cable"
terminal.
® Typical when a Cable/Satellite
box is connected to a TV input.
® Prevents accidental tuning to an unavailable
signal.
_2_Select
"Start"
Skip: Go to
(Labetinputs)
Start scanning the channels
(Availablechannels are automatically set.)
@
B
(D
O3
(D
t-
•
Press to return to
the previous screen
RETURN
® About broadcasting
systems
Analog
(NTSC):
Conventional
broadcasting
Digital (ATSC):
New
programming
that allows
you to view
more channels
featuring
high-quality
video and sound
Complete
the Auto program
setup
Completion message is displayed when the Auto program scan is successfully completed.
If there is no available
OK
channel, return to @ - _1_
(ANT/Cable
setup).
"Not used" will be selected.
Select the Input labels (Label inputs)
Select
NEXT then press OK to go to the next step.
or
Follow the instructions on
screen to complete the
following operations.
Label: [BLANK] Not used/Blu-ray/DVD/DVD
REC/HOME THTR/GAME/COMPUTER!
VCRICABLEISATELLITEIDVRICAMERAIMONITORIAUXlRECEIVERIMEDIA
CTR/MEDIA
EXT!OTHER
• Operation of the EXIT button
during "First
time setup"
Press the button once to display confirmation
screen. Press again to close
confirmation
screen.
[EXIT confirmation
screen]
Yes @ Exit "First time setup"
No @ Return to the original screen.
15