Panasonic Viera TC-P46G25 Operating Instructions Manual page 29

Before using a Network camera, you need to register the camera as shown below. You can also
set default camera or disconnect/delete the registered cameras.
Follow direction O-@ in "Network settings" (p.42)
Select "Setup" and "Network cameras list"
If there is no registered camera
Select "Yes" to start search
Set Network camera setting
• Press to exit from
a menu screen
EXIT
• Press to return
to the previous
screen
RETURN
• Network camera setting operation
"Please refer to camera's settings and enable its link mode. Start searching for network camera?"
"Yes" to start camera search.
@ Before you start to search for a camera, switch the camera to registration
mode. (For this operation, please refer to the operating manual for the
Network camera.)
@ Search condition also depends on "Network settings" (p.42-45).
"Remove camera information?"
"Yes" to delete camera information.
"Disconnect to camera?"
@ "Yes" to delete camera connection.
"Disconnected" will be displayed in "Status".
"Set this camera as default camera?"
_ "Yes" to set to the default use.
Displayed "(Default)" next to camera name.
(Available only when reconnecting)
Q "Connect to Camera?
"Yes": "Connect" will be displayed in "Status".
(Attach up to 8 Network cameras simultaneously).
@
Z
(D
o
C)
3
(D
........................................................................................................................................................ ° 29