Panasonic Viera TC-P46G25 Operating Instructions Manual page 10

Accessories/0ptional Accessory ( Continu
( Warning )
Do not disassemble or modify the pedestal.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution -)
Do not use any other TV and displays.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
® If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
® If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Adjust the plasma panel to your
desired angle.
(View from above)
Center of the
rotation.
b
® Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full
rotation range.
@ Do not place any objects or hands within the full rotation range.
® TC-P42G25
a: 12.9 " (327 mm)
b: 15.7 " (397 mm)
c: 15 °
® TC-P46G25
a: 10.4 " (263 mm)
b: 17.5 " (443 mm)
c: 10 °
@ TC-P5OG25
a: 11.0 " (277 mm)
b: 17.5 " (443 mm)
c: 10 °
attach
insert it firmly until the
tabs on both sides click
into place.
To remove
Keep pushing both
sides until they snap
and pull.
10
Reference of connection
Antenna terminal
to
Firmly tighten by hand.
Pin terminals HDMI termi nal
Match colors of plugs and terminals. ® Insert firmly
Insert firmly.