Panasonic Viera TC-P46G25 Operating Instructions Manual page 35

• Menu list
Menu
Adjustments/Configurations (alternatives)
Locks the channels and programs. (p. 46)
Closed caption Displays subtitles (Closed caption) (p. 50)
Sets the mode to select the channel with the Channel up/down button.
Channel surf mode (All/Favorite/Digital only/Analog only)
Favorite: Only channels registered as FAVORITE. (p. 20)
Language Selects the screen menu language.
Clock Adjusts the clock. (p. 17)
ANT/Cable setup Sets channels. (p. 49)
Input labels Selects the terminal and label of the external equipment. (p. 51 )
Prevents "Image retention" with Wobbling. (Automatic/Periodic)
Pixel orbiter _ Automatic: Shifts the display image automatically.
Periodic: Shifts the display image every (1/2/3/4)minutes accordingto what was set in the "Time(minutes)"menu.
Sets the time for the "Pixel orbiter-Periodic" setting. (1121314)
Changes the brightness of the side bar (OfflDarklMidlBright) (4:3 mode only)
The recommended setting is "Bright" to prevent the panel "image retention". (p. 58)
Press "OK" to start the horizontal "Scrolling" on the screen. (p. 58)
Sets Network settings (p. 42)
Controls the equipment connected to HDMI terminals. (Off/On) (p. 38)
"Power off link", "Power on link", "Energy saving mode", "Unselected device energy save"
and "Default speakers" cannot be selected if "Off" is set.
Sets "Power on link" of the HDMI connected equipment. (No/yes) (p. 38)
Sets "Power off link" of the HDMI connected equipment. (No/Yes) (p. 38)
Sets "Energy saving mode" of the HDMI connected equipment. (Quick start/Save) (p. 38)
Sets "Unselected device energy save" of the HDMI connected equipment. (p. 38)
(No (stay on)/Yes (with prompt)/Yes (no prompt))
Selects the default speakers. (TV/Theater) (p. 38)
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION
continue for more than 10 minutes. (Stay on/Power TV off)
Note
Not in use when "Auto power on", "On/Off Timer" or "Lock" is set, or while "SD mode" or "Digital
Channel" is selected.
"No signal for 10 minutes was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No signal for 10 minutes".
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
To conserve energy, the TV automatically turns off when no operation of remote and side
panel key continues for more than 3 hours. (Stay on/Power TV off)
Note
Not in use when "Auto power on" or "On/Off Timer" is set, or while "PC inputs" is selected.
"No activity for 3 hours was activated" will be displayed for about 10 seconds when the TV
is turned on for the first time after the power was turned off by "No activity for 3 hours".
The 0n-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes prier to the shut-off.
Select keyboard type. Operate USB keyboard (p. 19)
U.S./Canadian French/Canadian Multilingual Standard/Spanish (Latin America)/Spanish (Spain))
Turns TV On automatically when the cable box or connected device is turned On (No/yes)
TV AC cord must be plugged into this device. TV turns on every time the power is restored.
The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 52)
Sets the media contents or playback type to play back SD cards automatically.
'SlideshowlThumbnaillMovielMusiclSet later/Off)
Restarts the first time setup from "Language" setting. (p. 14)
Displays TV version and software license.
Performing Reset will clear all settings made with Setup, such as channel settings. (p. 48)
Unselected device
Default speakers
First time setup
About
Reset to defaults
• Sub menu list
Menu Item • Adjustments/Configurations (alternatives)
Sets the mode to select the channel with the Channel up/down button.
" Channel surf mode (All/Favorite/Digital only/Analog only)
_ Set favorite Sets favorite channels. (p. 19)
u, _ Edit CH caption Changes the station identifier. (p. 49)
Signal meter Checks the signal strength if interference or freezing occurs on a digital image. (p. 49)
® In the AV mode, the Audio and Setup menus give fewer options.
• Confirmation screen is displayed. Select "Yes" and press OK to reset.
@
A-T"
"OO
_c
o..
¢.-
"q3
=-:t-
So
_.J00
35