Panasonic Viera TC-P46G25 Operating Instructions Manual page 16

First Time Setup
(Continued)
Configure Network settings
_t_Select the Network type
Set later: Go to @
You can set in "Setup" menu later.
Wireless (WiFi): Start "Wireless network" (p. 17)
_-2_ Select the setting mode
Automatic:
Manual:
Press OK to start setup automatically.
Error screen is displayed when
Network connection has failed.
Go to Manual setting.
IAut°maticl _7
Start connection test
[Connection test I
Connection
@ Complete "Network settings"
Helpful information is displayed when you
successfully complete "Network settings".
• Manual setting
• Error screen
16
• Press to return to
the previous screen
RETURN
Retry: Go to "Start connection test"
Set later: Go to 0
• About wireless LAN
® Wireless LAN adapter and Access point need to be obtained separately.
For the latest information on applicable LAN adapters, check the following website:
http ://panasonic.jp/support/global/cs/tv/
® Check that the Access point supports WPS*.
(if it does not support W PS, theencryptionkeyof theAccesspoint is requiredwhen configuringsettings.)
® Followthe instructionson theAccesspoint setup screenand configurethe appropriate securitysettings.
Formoredetails on settingof Accesspoint, pleasereferto operatingmanualfor theAccesspoint.
® We recommend using 11n (5 GHz) for the wireless system between the wireless
LAN adapter and Access point.
Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the
communication speed may be slower.
® If the wireless system of the Access point is changed, devices that could connect by
wireless LAN may no longer be able to connect.
® When VlERA CAST, Network camera, or other device is using the network, do not
disconnect the wireless LAN adapter.
® Keep the TV away from the following devices as much as possible:
Wireless LAN, Microwaves, and other devices that use 2.4 GHz and 5 GHz signals.
Otherwise, the TV failures such as malfunction may occur due to the radio wave interference.
* WPS: Wi-Fi Protected Setup