Setting Menu - Epson STYLUS 3000 Service Manual

1.5.2.2 Setting Menu

The printer enters default setting mode when you press the Media Type button while turning on the
printer. The menus available are shown Table 1-31.
Menu
2
Print direction*
Font
Pitch
I/F mode
Auto I/F wait mode
Software
Auto CR (IBM mode only) On / Off
A.G.M. (IBM mode only)
Character tables
Standard version
International character set
for Italic table
Auto line feed
Network I/F mode
0 slash
Page length
Skip over perforation
Auto tear off
3
Banner mode *
Parallel I/F transfer rate
Note) 1. Underlined parameters in bold letters are factory default settings.
2. Refer to Table 1-32 and Table 1-33.
3. Refer to Table 1-34.
Rev. A
Table 1-31. Default Setting Menus
Auto / Bi-d / Uni-D
Roman / Sans Serif / Courier / Prestige / Script/
Roman T / Sans Serif H / Draft
10 cpi / 12 cpi / 15 cpi / 17.1 cpi / 20 cpi / Proportional
Auto / Parallel / Mac Serial / Option
10 seconds / 30 seconds
ESC/P2 / IBM XL24E
On / Off
Italic
PC 437, PC 850
PC 860, PC 863
PC 865, PC 861
BRASCII, Abicomp
Roman 8, ISO Latin 1
PC 437 (Greek), PC 853
PC 855, PC 852
PC 857, PC 866
PC 869, MOZOAWIA
Code MJK, ISO 8559-7
ISO Latin 1T, Bulgaria
PC 774, Estonia
ISO 8859-2, PC 866 LAT
Italic USA, Italic France
Italic Germany, Italic U.K
Italic Denmark, Italic Sweden
Italic Italy, Italic Spain 1
On / Off
This mode is for network environment.
Off: Used in usual environment
On: Used in network environment
0 / 0 with slash
11 inch / 12 inch / 8.5 inch / 70/6 inch / other
On / Off
On / Off
On / Off
Fast / Normal
EPSON Stylus COLOR 3000
1
Setting *
1-27