Vulcan-Hart VIR1BF Operation Manual page 7

LEVELING AND CONNECTING MANIFOLDS - ALL MODELS
1. Place the broiler in its exact position or battery lineup.
2. Using a carpenter level, level the broiler from front to rear and from side to side. Unless the
broilers are level, they will not give proper cooking results, and equipment being batteried
will not draw up tight.
If you are installing a new battery appliance to an existing field appliance, the union on the existing
field appliance must be checked against the union being used on the new range. The union
manufacturer's name around the face surface of the union nut must match.
– 7 –