Using the Default-Setting Mode
You can change several printer settings that control a variety of
functions such as print direction and loading position. Because
these settings take effect each time you turn on the printer, they
are called default settings.
The factory default settings are designed to meet the needs of
most users, so you probably do not need to change them. The
table below lists the features you can select in the
default-setting mode.
Setting
Print direction
Font
Pitch
I/F mode
Auto interface wait
time
Software
Auto CR*
AGM*
Character table
International
character set for
Italic table
Auto line feed
Network I/F mode
0 slash
Page length for
continuous paper
8-4
The Control Panel
Options
Auto, Bi-D, Uni-D
Courier, Roman, Sans Serif, Prestige, Script,
Roman T, Sans Serif H, Draft
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
Auto, Parallel, Serial, Option
10 seconds, 30 seconds
ESC/P 2, IBM XL24E
Off, On
Off, On
PC437, PC850, PC860, PC861, PC863, PC865,
Abicomp, BRASCII, Roman 8, ISO Latin 1, PC437
Greek, PC853, PC855, PC852, PC857, PC866,
PC869, MAZOWIA, Code MJK,
ISO 8859-7, ISO Latin 1T, Bulgaria, PC774,
Estonia, ISO 8859-2, PC866LAT, Italic.
Italic U.S.A., Italic France, Italic Germany,
Italic U.K., Italic Denmark 1, Italic Sweden,
Italic Italy, Italic Spain 1
Off, On
Off, On
0, 0
11 inch, 12 inch, 8.5 inch, 70/6 inch, Others