Introduction; General; Ordering Parts; Fryer Capacities - Vulcan-Hart VK SERIES Installation & Operation Manual

VK SERIES GAS FRYERS
Vulcan Fryers are produced with quality workmanship and material. Proper installation,
usage and maintenance will result in years of satisfactory performance.
Before installing the fryer, thoroughly read this manual and carefully follow all instruction.
This manual is applicable to model listed on the cover page. Procedures in this manual
will apply to all models unless specified. Pictures and illustrations can be of any model
unless the picture or illustration needs to be model specific.
Customers may order parts directly from their local authorized service center. If not
known, call Vulcan Customer Service at 800-814-2028.
To speed up your order, provide the model number, serial number, gas type, part needed,
item part number (if known) and quantity needed.
This fryer was carefully inspected before leaving the factory. Upon acceptance of the
shipment, the transportation company assumes full responsibility for safe delivery.
Immediately after unpacking the fryer, check for possible shipping damage. If the fryer is
damaged, save the packaging material and contact the carrier within 15 days of delivery.
Check that the following have been included:

Crumb Rack(s)

Basket Hanger(s)

Tank Brush

Adjustable Casters (4) two locking, two non-locking for freestanding fryers. Fryer
Batteries with the KleenScreen
from the factory.

Drain Pipe Extension for freestanding fryers only.

Twin Fry Baskets (2) per fry tank

Cleanout Rod

Fryer Batteries with the KleenScreen PLUS® Filtration System
 Filter Pan
 Suction Tube
 Screen Assembly
 Complimentary Pack of Micro-Filtration Envelopes
 High temperature discard hose

Manual, Quick Start Guide(s), and Warranty – Keep in safe place for future
reference.
VULCAN-HART

INTRODUCTION

GENERAL

ORDERING PARTS

UNPACKING

Filtration System have casters installed
PLUS®
-4-
F-32971 Rev. K (December 2012)