Sony RDR-VX560 Operating Instructions Manual page 76

"@" and "OTR" light up, and the remaining
recording time appears in the fiont panel
display.
When the time counter reaches "0:00," the
recorder stops recording and turns off.
Tocancel t heQuick Timer
Press • REC repeatedly until the counter appears
in the fiont panel display. The recorder returns to
normal recording mode.
Tostoprecording
Press • STOP twice.
Checkingthe remaining tape length
You can check recording information, such as
remaining tape length or recording mode, etc.
PressDISPLAY whilerecording.
The information display appears.
Press the button repeatedly to change the display
(page 72).
• The remaining tape length may not be indicated
accurately for short tapes such as T-20 or T-30, or tapes
recorded in LP mode.
• After DISPLAY is pressed, it may take one minute for
the remaining tape length to appear.
................. ]
................. ]
[] Recording status
[] Time counter
[] Recording mode
[] Remaining tape length
[] Input source
To check the remaining tape length, set "VCR
Function" - "Tape Length" of "Features" in the
"Setup" display correctly (page 103).
"_" Hint
You can view the infimnation also in the front panel
display. Press TIME/TEXT repeatedly to change the
display. Note that TIME/TEXT does not work during
One-touch Timer Recording.
76,s