Sony RDR-VX560 Operating Instructions Manual page 110

Recording does not stopimmediately after
• STOPispressed.
It will take a few seconds for tile recorder to input
disc data before recording call stop.
Timerrecording isnotcomplete o rdidnotstart
fromthebeginning.
There was a power failure during recording.
The recorder's internal clock stopped due to a
power failure that lasted for more than 30
minutes. Reset the clock (page 97).
The channel or input changed from the one you
are recording.
The program that starts first has priority and the
second program starts recording only after the
first program has finished. If the programs start
at the same time, the program listed first in the
menu has priority (page 52).
There is not enough disc space for the recording.
The® indicator f lashes aftertimerrecording i s
set.
Insert a recordable disc (page 30).
The disc has 99 or more titles, which prevents
further recording.
The disc is protected (page 64).
The disc is finalized (page 66).
TheSYNC-REC i ndicator flashes afterSynchro-
Recording isset.
Insert a recordable disc (page 30).
Insert a disc with enough space for the recording.
The disc has 99 or more titles, which prevents
further recording.
The disc is protected (page 64).
The disc is finalized (page 66).
Contents previouslyrecorded wereerased.
Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
VCRPlayback
The playback picture does not appear on the TV
screen.
Make sure tile TV is set to tile channel for tile VCR.
If a monitor is used, set it to video input.
Thepicture is notclear.
Adjust tile tracking by tile TRACKING +_
button.
The video heads are dirty (see page 113). Clean
the video heads using a Sony video head cleaning
cassette. If a Sony cleaning cassette is not
available in your area, have the heads cleaned at
your nearest Sony dealer (a standard service fee
will be charged). Do not use a commercially
available liquid type cleaning cassette, as it may
damage the video heads.
The video heads may have to be replaced.
Consult your local Sony dealer for more
information.
The tape is defective.
Thepicture rollsvertically during picture
search.
Adjust tile vertical hold control on tile TV or
monitor.
Thepicture hasnosound.
Tile tape is defective.
Check the audio cord connection.
A tapecannot b e inserted.
Check that a tape is not already in tile tape
compartment.
VCRRecording
The channel cannot he changed from the one
you are
recording.
Set tile TV's input source to "TV."
NoTVprogram appears onthe TVscreen.
Make sure tile TV is set to tile channel for tile VCR.
lfa monitor is used, set it to video input.
Thetapestarts playing assoonas it is
inserted.
Tile safety tab has been removed. To record on
this tape, cover the tab hole.
Thetapeisejected when• REC is pressed.
Check that tile safety tab has not been removed.
Nothinghappens when• REC ispressed.
Make sure tile tape is not at its end.
110Us