Responding To Error Messages - Kyocera TASKalfa 205c Operation Manual

Troubleshooting > Responding to Error Messages

Responding to Error Messages

If the touch panel displays any of these messages, follow the corresponding procedure.
A
Error Message
Acceptable staple count
exceeded.*
Add the following paper in
cassette #.
Add the following paper in multi
purpose tray.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
B
Error Message
Box limit exceeded.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
C
Error Message
Cannot connect to Authentication
Server.*
Cannot duplex print on the
following paper.*
Checkpoints
Is the acceptable staple count
exceeded? For details, refer to
Document Finisher (option) on
page 11-21.
Is the indicated cassette out of
paper?
Is the paper of the selected size
loaded in the multi purpose tray?
Checkpoints
—
Checkpoints
—
—
—
—
Did you select a paper size/
media type that cannot be duplex
printed?
10-14
Corrective Actions
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job.
Load paper.
Press [Paper Selection] to select the
other paper source.
Press [Continue] to print on the paper in
the currently selected paper source.
Load paper.
Press [Paper Selection] to select the
other paper source.
Press [Continue] to print on the paper in
the currently selected paper source.
Corrective Actions
Document box is full, and no further
storage is available; Job is canceled.
Press [End]. Try to perform the job again
after printing or deleting data from the
Document box.
Corrective Actions
Set machine time to match the server's
time.
Check the domain name.
Check the host name.
Check the connection status with the
server.
Press [Paper Selection] to select the
available paper.
Press [Continue] to print without using
Duplex function.
Reference
Page
—
3-3
3-5
Reference
Page
—
Reference
Page
9-23
9-33
9-33
—
4-8