Kyocera TASKalfa 205c Operation Manual page 332

Troubleshooting > Responding to Error Messages
Error Message
Memory is full.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
P
Error Message
Paper is left.
Paper jam.
Print overrun.
R
Error Message
RAM disk error.*
Checkpoints
—
—
Checkpoints
—
—
—
Checkpoints
—
10-18
Corrective Actions
Unable to continue the job as the
memory is used up.
Press [Continue] to print the scanned
pages. The print job cannot be
processed completely.
Press [Cancel] to cancel the job.
The process cannot be performed due
to insufficient memory. If only [End] is
available, press [End]. The job will be
canceled.
Corrective Actions
Remove paper from the document
finisher.
If a paper jam occurs, the machine will
stop and the location of the jam will be
indicated on the touch panel. Leave the
machine on and follow the instruction to
remove the jammed paper.
Warning. Low printer memory. The job
was paused. Press [Continue] to re-start
the job.
Corrective Actions
An error has occurred on the RAM disk.
Job is canceled. Press [End]. The
possible error codes and their
descriptions are as follows.
01: Format error. Restart the system or
turn the machine OFF and then ON.
04: Insufficient space on the RAM disk.
Delete data stored on the RAM disk to
increase available space.
Reference
Page
—
—
Reference
Page
—
10-24
—
Reference
Page
—