Kyocera TASKalfa 205c Operation Manual page 329

Troubleshooting > Responding to Error Messages
Error Message
Cannot offset the following
paper.*
Cannot print the specified
number of copies.*
Cannot process this job.*
Cannot staple at the specified
position.
Cannot staple the following
paper.*
Cassette # failure.
Check the document processor.
Check waste toner box.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
D
Error Message
Developer unit is not installed.
[C][M][Y][K]
Drum unit is not installed.
[C][M][Y][K]
Checkpoints
Did you select a paper size/
media type that cannot be offset?
–
—
Have you selected a position that
cannot be stapled?
Did you select a paper size/type
that cannot be stapled?
—
Is the document processor
open?
Is the top cover of the document
processor open?
Is the waste toner box full?
Check waste toner box.
Checkpoints
—
—
10-15
Corrective Actions
Press [Paper Selection] to select the
available paper.
Press [Continue] to print without using
Offset function.
Only one copy is available due to
processing too many jobs in parallel.
Press [Continue] to continue printing.
Press [Cancel] to cancel the job.
This job is canceled because it is
restricted by User Authorization or Job
Accounting. Press [End].
Press [Paper Selection] to select the
available paper.
Press [Continue] to print without using
Staple function.
Press [Paper Selection] to select the
available paper.
Press [Continue] to print without using
Staple function.
Contact your Service Representative.
Press the System Menu/Counter key,
[Adjustment/Maintenance], [Service
Setting] and then [Enable Repaired
Unit]. Press [Execute] to perform Enable
Repaired Unit.
Close the document processor.
Close the top cover of the document
processor.
Replace the waste toner box.
The waste toner box is not installed
correctly. Set it correctly.
Corrective Actions
Replace the developer unit (g) to our
specified developer unit. See the leaflet
supplied with the developer unit.
Replace the drum unit (f) to our
specified drum unit. See the leaflet
supplied with the drum unit for details.
Reference
Page
3-43
—
—
—
—
—
—
—
10-5
10-5
Reference
Page
—
—