Adjustment/Maintenance - Kyocera TASKalfa 205c Operation Manual

Setup, Registration, and User Management > System Menu

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
Item
Density Adjustment
Copy
Send/Box
Background Density Adj.
Copy (Auto)
Send/Box (Auto)
Toner Save Level (EcoPrint)
Copy
Printer
Auto Color Correction
Correcting Black Line
Display Brightness
Color Registration
Adjust density.
Adjust copy density. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Adjust scan density when sending or storing the data in Document Box. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density adjustment.
Darkens or lightens overall background density adjustment during copying. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density when sending images or storing them in the
Document Box. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Set the toner-saving level when using EcoPrint.
Lowers or raises the toner-saving level during copying. Adjustment can be made in 5 levels.*
Value: 1 to 5
Lowers or raises the toner-saving level during printing. Adjustment can be made in 5 levels.
Value: 1 to 5
This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white during Auto Color Mode. Setting a lower value will result
in more originals being identified as color, while a larger value will tend to increase the number
of originals being identified as black and white.
Value: 5 (B & W), 4, 3, 2, 1 (Color)
Correct fine black lines (black streaks caused by contamination), which may appear on the
copies, when the document processor used.
Value
Off: No correction performed.
On (Low): Correction performed. The reproduction of the image becomes lower when using
Off.
On (High): Correction performed. Select this item if black streak remains after using On (Low).
The reproduction of the image becomes lower when using On (Low).
NOTE: Using Correcting Fine Black Line can impair reproduction of fine characters. It is
recommended to keep the default ([Off]).
Set the brightness of the touch panel.
Value: 1 (Darker), 2, 3, 4 (Lighter)
When first installing the machine or moving it to a new location, color drift during printing may
occur. Use this function to correct the color position of each of cyan, magenta and yellow to
resolve color drift.
For more information, refer to the Color Registration Procedure below.
9-25
Description