Kyocera TASKalfa 205c Operation Manual page 330

Troubleshooting > Responding to Error Messages
E
Error Message
Error occurred at cassette #.
F
Error Message
Failed to specify Job
Accounting.*
Failed to store job retention data.
Finisher failure.
Finisher tray is full of paper.
Fuser unit is not installed.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
H
Error Message
High temperature. Adjust room
temp.
I
Error Message
Incorrect account ID.*
Incorrect Login User Name or
Password.*
Inner tray is full of paper.
Intermediate transfer unit is not
installed.
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Checkpoints
—
Checkpoints
—
—
—
Is the acceptable storage
capacity exceeded for the
document finisher tray?
—
Checkpoints
—
Checkpoints
—
—
—
—
10-16
Corrective Actions
Remove the indicated cassette. Press
[Next >] to follow the instructions.
Corrective Actions
The job is canceled. Press [End].
The job is canceled. Press [End].
Contact your Service Representative.
Press the System Menu/Counter key,
[Adjustment/Maintenance], [Service
Setting] and then [Reset Disable
Function Mode]. Press [Execute] to
perform Reset Disable Function Mode.
Remove paper from the document
finisher tray.
Replace the fuser unit (h-1) to our
specified fuser unit. See the leaflet
supplied with the fuser unit for details.
Corrective Actions
Adjust the temperature and the humidity
of your room.
Corrective Actions
The Account ID does not match. Check
the registered Account ID.
Enter correct login user name or
password.
Remove paper from the inner tray and
press [Continue].
Replace the intermediate transfer unit
(r) to our specified intermediate transfer
unit. See the leaflet supplied with
intermediate transfer unit.
Reference
Page
—
Reference
Page
—
—
—
—
—
Reference
Page
1-3
Reference
Page
—
—
—
—